How to get the MOST from you DeWalt batteries!!

Here is a guide to getting the most of your DeWalt batteries also Porter Cable and Black and Decker-- PLEASE read and pass on to all your friends and family---
Please note the very important step #3-- DO NOT TOTALLY DISCHARGE BATTERIES!!! and weekly or bi-weekly leave the batteries in the charger at least 24 hrs for full maintance cycle.

Here you go!!

2010 - Best Practices for Long Battery Pack Life






When using the DEWALT batteries and chargers, the batteries can last longer than double many of our competitors. To ensure the maximum life out of a battery pack there are some best practices which must be followed as general maintenance for Nickel Cadmium Batteries.



1. The battery will perform best if it is charged at room temperature. Do not charge in temperatures below 40 degrees Fahrenheit or above 105 degrees Fahrenheit. Under these conditions, the battery will not take a full charge, and may be permanently damaged.





2. If the battery is hot, let the it sit out of the charger for a least 2 hours until the battery is at room temperature. Otherwise, immediately place the battery pack in the charger.



3. Do not try to discharge the battery beyond the point where the tool no longer performs with the power and torque needed for the job, because it may cause permanent damage which will prevent the battery from taking a full charge. Do not tape trigger on the tool to discharge the battery



4. Store the battery in a cool, dry place. If temperatures exceed 120 degrees Fahrenheit, it may reduce the battery life.



5. Periodically charge the battery overnight to take full advantage of the 3-Stage Charging System for optimum runtime and battery life.

Battery Care

Hey Guys---
Here is a VERY important tidbit for everyone who uses DeWalt cordless tools---generally you are your tools worst enemy!!  Due to false information running ramped among cordless tool users everyone is running their batteries totally DEAD before you charge them up---NOT GOOD!  You have just killed your battery life big time.  The batteries need to be charged when they start to loose power--dont run them down to get that last turn of the screw-- change the battery!!  When the power starts to drop put them on the charger and charge them up.  It is also good to put them on the charger overnight once a week if you use the tools daily so they have a chance to totally charge up and also the charger will have a chance to perform maintenance on the battery.  There is a link below to the DeWalt battery care info-- if you have employees using your batteries you may want to print some copies and save yourself some money on replacing batteries which should still be working.

FIND OUT MORE HERE